Full color Outdoor PH12.5mm LED display

Wide application & short ROI High brightness & contrast ratio: 4000:1 High fresh frequency CE, approved

  Full color Outdoor PH12.5mm LED display LED Full color Outdoor PH12.5mm display   

Technical Specification:

 Pixel configuration:SMD3528 1R1G1B 3 in 1LEDs configuration:"Red:wave length: 625~630nm;300-400mcd Green:wave length525~530nm;600-800mcd Blue:wave length: 470~475nm;100-150mcd"Pixel pitch(mm):12.5Pixel density(dots/SQM):6400 Calibrated brightness(cd/sqm,nit):1200 nits(adjustable)Calibrated brightness proportion ratio:R: G: B = 30%:60%:10%Color temperature:3,500° — 9,500° K(adjustable)Contrast ratio:4,500:1Brightness adjustment(dimming):100 grade auto/manual-adjustmentView angle(degree)(50% brightness):Horizontal: 160° (80° off center); Vertical: 160° (80° off center)Readability viewing angle:Horizontal/ Vertical: 170° (85° off center)Color capability:4.4 trillionRefresh rate(Hz):>1200 HzFrame frequency(Hz):>60 HzInterface port:DVI interface(DVI connector)Input signal:VGA, Video, AVI, MOV, MPG, DAT, VOB etc.Protection grade:IP65 front side/IP54 backsideLED Drive :Constant-current driveLifetime(hours)(50% brightness):100,000 hours Signal transmission direction:HorizontalOperating temperature(Celsius degree):-30~+65'Storage temperature(Celsius degree):-35~+70'Operation humidity(RH):0-95%Operation humidity(RH):0-99%Servicing:Front and back serving optionalControl mode:Synchronous & asynchronous availableCommunication options:Wire Ethernet, Fiber Ethernet,RF wireless,GPRSPower:120/240 V  AC single phase(50-60Hz)Average power consumption(W/SQM):72Screen operation mode(scan/static): 1/4Module configuration(Pixels quantities of the module):Length:32:Height:16Module dimensions(mm):Length:400:Height:200  

 Features:

The full color video display can devided to two kinds: indoor full color LED display and outdoor full color LED display.Indoor full color LED display: The pixel pitchs include P4 P5 P6 P7.62 P10 P12. The brightness must above 800nits and protection grade should above IP54. It needn’t too long viewing distance. It always used as background wall and play the change of background color and contrast the atmosphere.Outdoor full color LED display:The pixel pitchs include P10,  P12,  14,  P16,  P18,  P20,  P22,  P25,  P30,  P31.25. The brightness must above 5500nits and protection grade must above IP65. It should have longer viewing distance than indoor display. Full color display should consider two other concepts: white balance and gray grade. The RGB gray grade presented by the brightness grown from weak to strong. When RGB bright fully at the same time and the rate of RGB is 3:6:1, then the display will present pure white. The full color display required high refresh frequecy.

Full color Outdoor PH12.5mm LED display